2013-2020 Ford Fusion Energi Hybrid Coolant Reservoir Tank

This Genuine OEM auto part is a Coolant Reservoir Tank specifically designed for the 2013-2020 Ford Fusion Energi Hybrid.  The coolant reservoir tank serves as the primary storage for the engine's coolant, facilitating the circulation of the coolant through the engine to maintain optimal operating temperatures. Over time, these tanks can develop leaks or become brittle. When there's a need for replacement, this part ensures the hybrid engine continues to operate efficiently and prevents overheating.

This is a brand-new genuine part in OEM manufacturer's packaging. It is the exact same part you would purchase from a new car dealership and is not an aftermarket component.

Installation Instructions

Tools Needed:

- Flathead screwdriver

- Pliers

Steps:

1. Make sure the vehicle is parked on a stable surface and that the ignition is turned off. Allow the engine to cool before beginning the replacement process.

2. Place a drain pan under the coolant reservoir tank to catch any coolant spillage.

3. Using pliers, remove the hose clamps and carefully detach the hoses from the existing coolant reservoir tank.

4. With the flathead screwdriver, unfasten any mounting screws or clips holding the tank in place.

5. Carefully lift and remove the old coolant reservoir tank from its position.

6. Install the new Genuine OEM Coolant Reservoir Tank by reversing the removal steps.

7. Reattach the hoses and secure them with the hose clamps using the pliers.

8. Refill the coolant reservoir with the appropriate coolant mix, ensuring it reaches the indicated level.

The replacement procedure is estimated to take about 45 minutes and is of an intermediate skill level.

Vehicle Fitment