Live Support: Text or Call 832-722-4697
×
QTY (6) OF 68323649AB-D9 2014-2018 Ram 1500 2500 3500 (6) Body Side Aperture Exhauster Vents
68323649AB-D3 2014-2020 Ram 1500 2500 3500 Body Side Aperture Exhauster  - Fits old body style only
68323649AB-D3 2014-2020 Ram 1500 2500 3500 Body Side Aperture Exhauster  - Fits old body style only
68323649AB-D3 2014-2020 Ram 1500 2500 3500 Body Side Aperture Exhauster  - Fits old body style only
Click to zoom in

2014-2018 Ram 1500 2500 3500 (6) Body Side Aperture Exhauster Vents

Dodge
In stock
$ 64.32

2014-2018 Ram 1500 2500 3500 (6) Body Side Aperture Exhauster Vents

This package includes 6 vents.

 

The OEM Factory New Body Side Apertures Exhausters are a direct fit replacement part for the 2014-2018 Ram 1500, 2500, and 3500 models. It is a factory-new, OEM part that is designed to match the fit, function, and appearance of the original equipment on the vehicle. 

The body-side aperture exhausters on these Ram models are designed to provide additional ventilation for the vehicle. They are located on the side of the vehicle and allow air to flow into the vehicle's cabin, helping to improve air circulation and reduce heat buildup inside the vehicle. They also help to reduce wind noise and improve aerodynamics.

To install two new body side aperture exhauster vents on a 2014-2018 Ram 1500, 2500, or 3500 (old body style only), you will need the following tools:

  • Flathead screwdriver
  • Trim panel removal tool

Here are the steps to follow:

  1. Locate the existing body side aperture exhauster vents that need to be replaced. They are typically located on the rear of the cab, near the bottom of the bed.

  2. Use the trim panel removal tool to carefully pry off the plastic cover from the inside of the cab.

  3. Locate the screws or clips that secure the old vents to the cab.

  4. Use the flathead screwdriver to remove the screws or gently pry off the clips to detach the old vents from the cab.

  5. Install the new vents onto the cab by aligning them with the screw holes or clips.

  6. Insert the screws or snap the clips into place to secure the new vents to the cab.

  7. Snap the plastic cover back onto the inside of the cab.

  8. Test the new vents to ensure they are working correctly.

The installation process should take around 30-45 minutes to complete, depending on your skill level and experience. This job does not require any specialized skills, and it can be done by anyone with basic mechanical knowledge.

Read More
Read Less

EASY NO HASSLE RETURN INFORMATION

Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.

 

WHAT CAN NOT BE RETURNED:

Any part that does not have all of the original packaging with the attached manufacturer part number label.

Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).

WE ALSO CANNOT ACCEPT YOUR RETURN IF:


You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.

ELECTRICAL PARTS.


Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.

An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.

 

All Products are. covered by a 1-year Warranty.

 

Our Warranty Coverage

We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.

One Time replacement.

Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.

Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David W.

2014-2018 Ram 1500 2500 3500 (2) Body Side Aperture Exhauster Vents - Fits old body style only

M
Matthew F.
2017 Ram Rebel cabin vents replacement👍

Perfect fit👍The old vents were pretty bad and the design is not the best. These new vents snap right in and the new seal design is great. I’d highly recommend using these to prevent leaks👍Thanks gang.

Your cart

×
product