2015-2020 Acura TLX Passenger Side Blind Spot Indicator BSI

The 2015-2020 Acura TLX Passenger Side Blind Spot Indicator (BSI) is an original equipment manufacturer part that aids in detecting and signaling the presence of vehicles in the blind spot area on the passenger side. This part is essential for the BSI system's functionality and is designed specifically for Acura TLX models within the 2015-2020 year range, serving as a direct replacement for the original component.

This genuine part comes in the OEM manufacturer's packaging, guaranteeing that it is the same quality as those provided by new car dealerships, not an aftermarket part.

Installation Instructions

Tools Needed:

• Socket set
• Panel removal tool
• Electrical tape (if needed)

Instructions:

1. Park the vehicle safely and ensure the ignition is turned off.

2. Open the passenger side door and identify the interior trim panel that covers the BSI sensor.

3. Gently remove the trim panel using the panel removal tool, taking care not to damage the clips.

4. Unplug the electrical connector from the current BSI sensor.

5. Remove any bolts or fasteners securing the BSI sensor with the socket set.

6. Take out the defective BSI sensor and replace it with the new one.

7. Secure the new BSI sensor with the previously removed bolts or fasteners.

8. Reattach the electrical connector to the sensor.

9. Reinstall the interior trim panel, ensuring all clips are properly engaged.

10. Test the BSI system to ensure it is operational.

Duration: Approximately 1 hour

Skill Level: Intermediate

Vehicle Fitment