2013-2019 Nissan Pathfinder Pathfinder Steering Wheel Clock Spring

The Pathfinder 2013-2019 Steering Wheel Clock Spring is a crucial component for anyone looking to ensure their vehicle's steering wheel is working properly. This Genuine OEM part is specifically designed for use in Nissan Pathfinder, Murano, or Altima models. This means that you can trust that it will fit and function perfectly with your vehicle, unlike aftermarket or generic parts which may not offer the same level of compatibility or quality.

Installation Instructions:

1. Before starting, ensure that the vehicle is parked on a flat and stable surface, and all occupants have vacated the area.

2. Locate the steering wheel clock spring on your Pathfinder, Murano, or Altima. It is typically located behind the steering wheel and is attached to the steering column.

3. Using a socket wrench, disconnect the negative terminal of the battery to avoid any electrical shocks.

4. Carefully remove the airbag from the steering wheel by prying off the covers or using a special tool. Take note of its orientation and location for future reference.

5. Locate the clock spring and remove it from its housing by unfastening any bolts or screws that secure it in place.

6. Take the new genuine Nissan steering wheel clock spring and position it in the same location as the old one. Ensure that it is aligned properly and oriented correctly.

7. Secure the new clock spring in place by tightening the bolts or screws that were removed earlier. Ensure that they are tightened to the manufacturer's specifications.

8. Reattach the airbag to the steering wheel by replacing the covers or using a special tool.

9. Reconnect the negative terminal of the battery and ensure that it is tightened properly.

10. Turn on the engine and test the steering wheel to make sure that it is functioning correctly. Check the horn and any other steering wheel controls to ensure they work properly.

Tools Needed: Socket wrench, special tool (if required).

Skill Level: Intermediate.

Time Required: 1-2 hours, depending on experience.

VEHICLE FITMENT