2013-2015 Ford C-Max Driver Side Tail Light Lamp Bulb Holder Socket

Driver Side 

This is a new tail light lamp bulb holder socket for the 2013-2015 Ford C-Max. It is a Genuine OEM (Original Equipment Manufacturer) part, meaning it is manufactured by Ford specifically for these vehicle models.

The tail light socket is an important component of the tail light assembly, providing a secure connection for the bulb and allowing it to function properly. Over time, the socket can become worn or damaged, causing the bulb to not function or even fall out, resulting in a broken tail light. This can not only be a nuisance, but also a safety concern.

Installation Instructions:

To install the 2013-2015 Ford C-Max Tail Light Lamp Bulb Holder Socket Genuine New, you will need the following tools:

• Flathead screwdriver
• Needle-nose pliers

The skill level needed for this installation is considered to be easy. It should take approximately 10-15 minutes to complete.

Here are the steps to install the tail light lamp bulb holder socket:

1. Open the tailgate and locate the tail light assembly that needs the bulb holder socket replaced.

2. Use the flathead screwdriver to gently pry off the bulb holder socket from the back of the tail light assembly. Be careful not to damage the surrounding area.

3. Use the needle-nose pliers to remove the old bulb from the socket. Discard the old bulb.

4. Insert a new bulb into the socket, making sure it is properly aligned.

5. Insert the new bulb holder socket into the back of the tail light assembly, making sure it is securely in place.

6. Test the new bulb to ensure that it is working properly.

7. Repeat steps 2-6 for any additional tail light assemblies that need the bulb holder socket replaced.

That's it! You have successfully installed the 2013-2015 Ford C-Max Tail Light Lamp Bulb Holder Socket Genuine New.