2011-2015 Chevrolet Volt (1) Turn Signal Light Front Socket

The 2011-2015 Chevrolet Volt (1) Turn Signal Light Front Socket is a high-quality, genuine OEM auto part that is designed to perfectly fit and function in your Chevrolet Volt. This specific part is the front turn signal light socket for the 2011-2015 Chevrolet Volt and it is made from durable materials that are built to withstand the rigors of everyday use.

Installation Instructions:

Note: These instructions assume that you are replacing the turn signal light front socket on a 2011-2015 Chevrolet Volt, and that the new socket is a genuine replacement part.

Tools Needed:

• Pliers
• Screwdriver
• Socket wrench set

Skill Level Needed:

• Intermediate

Instructions:

1. Locate the turn signal light on the front of your Chevrolet Volt.
2. Carefully remove the old turn signal light front socket by gently twisting it counterclockwise and pulling it out of the socket.
3. Using pliers, disconnect the wiring harness from the old socket.
4. Connect the wiring harness to the new turn signal light front socket.
5. Insert the new socket into the turn signal light socket and twist it clockwise until it is securely in place.
6. Test the turn signal light to ensure that it is functioning properly.
7. If the turn signal light is not working, double-check that the wiring harness is securely connected to the new socket.
8. Replace any components that were removed during the installation process, such as the light cover or any screws.
9. Repeat these steps for the other turn signal light on your Chevrolet Volt.

The time required to complete this job may vary depending on the skill level of the person performing the installation. However, it should take approximately 30-60 minutes.

VEHICLE FITMENT