2010-2017 Equinox or Terrain (1) Lower Control Arm Ball Joint

This Genuine OEM auto part is a Lower Control Arm Ball Joint designed explicitly for the 2010-2017 Equinox or Terrain. The specific part number is 19258791. This component serves as a pivot point between the wheels and the suspension of the vehicle, allowing for smooth movement and steering. The product comes directly in the OEM manufacturer's packaging and is the exact part that's available at new car dealerships. It is not an aftermarket product.

Installation Instructions

Tools Needed: Jack, Jack stands, Wrench set, Socket set, Ball joint separator

Time: Approximately 1 to 1.5 hours

Skill Level: Advanced

1. Ensure the vehicle is on a stable, flat surface and engage the parking brake.

2. Using the jack, lift the side of the vehicle where the ball joint replacement is needed and then secure the vehicle with jack stands.

3. Remove the wheel to expose the control arm and ball joint.

4. Disconnect the ball joint from the steering knuckle using the ball joint separator.

5. Once separated, use the appropriate wrench or socket to remove the ball joint from the control arm.

6. Install the new Lower Control Arm Ball Joint by securing it to the control arm with the provided fasteners.

7. Reconnect the ball joint to the steering knuckle and ensure it's firmly in place.

8. Reattach the wheel, lower the vehicle from the jack stands, and remove the jack.

Vehicle Fitment