If you're the proud owner of a 2007-2014 Toyota FJ Cruiser, you know that your vehicle is built to handle rugged off-road terrain and heavy loads. But even the toughest of vehicles need a little extra help when it comes to towing. That's where the Genuine OEM Toyota FJ Cruiser Tow Hitch Wire Harness comes in.

Installation Instructions:

Tools Needed:

• Socket wrench set
• Wire crimpers
• Electrical tape

Skill Level: Intermediate

Note: Before starting the installation process, make sure that the vehicle is turned off and the keys are removed from the ignition. It is also recommended to wear protective gear, such as gloves and safety glasses.

1. Locate the tow hitch on your 2007-2014 Toyota FJ Cruiser.

2. Use a socket wrench set to remove the bolts that are securing the tow hitch.

3. Once the bolts have been removed, gently lower the tow hitch and disconnect the electrical connector from the vehicle.

4. Take the new genuine Toyota tow hitch wire harness and connect it to the electrical connector on the vehicle. Use wire crimpers to securely attach the wires.

5. Route the wire harness along the frame of the vehicle towards the tow hitch.

6. Secure the wire harness to the vehicle frame using zip ties or other appropriate fasteners.

7. Connect the wire harness to the tow hitch using the provided connector.

8. Test the tow hitch wire harness to ensure that all lights and signals are functioning properly.

9. Wrap the wire harness with electrical tape to protect the wires and ensure a clean installation.

10. Use a socket wrench set to reinstall the tow hitch onto the vehicle.

Estimated Time: This installation process should take around 1-2 hours to complete, depending on the individual's experience level and familiarity with the tools required.

Note: It is important to follow the manufacturer's instructions and guidelines when replacing parts on your vehicle. If you are unsure about any step in the process, consult a professional mechanic for assistance.