2015-2020 Ford F-150 Tailgate Wiring Harness For Backup Camera and Remote Unlock

It is very important that your truck has all of these exact options, or this will be the wrong harness.

You must have a flip key which means that you have a remote control that you press the button on the end of the key and the key flips out, and you can insert the key into the ignition to start the truck. See the example below. Your key may not look the same as the photo. . If you have a remote with no flip-out key or if you have push button start IT WILL NOT WORK.

You must also NOT have the pro trailer backup assist.

You must also NOT have a trailer hook-up light on the back that shines down on the hitch. and trailer to help you hook up. 

You must  HAVE the regular fixed backup camera on the tailgate as well.

You must HAVE remote unlock where you press a button on your remote to unlock the tailgate. 

If you don't have these exact options, it will not work for you.

This is also the harness you need if you have an XL or XLT and are adding a backup camera.

This Genuine OEM Tailgate Wiring Harness is specifically designed to fit 2015-2020 Ford F-150 trucks.

Installation Instructions:

1. Before starting the installation, gather the necessary tools: wire strippers, electrical tape, and a screwdriver.
2. Open the tailgate of your Ford F-150.
3. Locate the existing tailgate wiring harness connections, typically found near the tailgate handle.
4. Carefully disconnect the old wiring harness, ensuring you do not damage any connectors or wires.
5. Position the new Genuine OEM wiring harness in the same location as the old one, aligning it properly with the connectors.
6. Connect the new harness to the existing connectors, ensuring secure connections.
7. Use electrical tape to secure and insulate the connections.
8. Double-check all connections for proper fitment and alignment.
9. The entire replacement process typically takes around 15-30 minutes and is considered a moderate skill-level job.

Vehicle Fitment: