2009-2012 Dodge Ram Back Seat Driver Side Inner or Outer Seat Belt Buckle
The 2009-2012 Dodge Ram Back Seat Driver Side Inner or Outer Seat Belt Buckle is an auto part designed for the 2009-2012 Dodge Ram models. The seat belt buckle is located on the back seat of the vehicle, specifically on the driver side, it is used as a connection point for the seat belt, allowing the passenger to fasten and secure themselves while the vehicle is in motion.
The problem this product resolves is that the seat belt buckle can become damaged or worn over time due to general wear and tear caused by use. A damaged or worn seat belt buckle can make it difficult to properly fasten the seat belt, which can be a safety concern. Additionally, a damaged or worn seat belt buckle can also make the interior of the vehicle look unsightly.
To replace the back seat driver side inner or outer seat belt buckle on a 2009-2012 Dodge Ram, you can follow these steps:
-
Locate the seat belt buckle in your vehicle. The back seat driver side seat belt buckle is typically located on the left side of the vehicle, either on the inner or outer side of the seat.
-
Remove any plastic covers or trim that may be covering the seat belt buckle. You may need to use a flathead screwdriver or a trim removal tool to do this.
-
Disconnect the electrical connector for the seat belt buckle by pressing the release tab and pulling the connector apart.
-
Remove the bolts or screws that are holding the seat belt buckle in place using a wrench or socket set.
-
Gently pull the seat belt buckle away from the seat.
-
Take the new seat belt buckle and position it in place of the old seat belt buckle.
-
Reattach the bolts or screws that are holding the seat belt buckle in place using a wrench or socket set.
-
Reconnect the electrical connector for the seat belt buckle by pressing the connector together until it clicks into place.
-
Test the new seat belt buckle by buckling and unbuckling the seat belt to ensure it is securely attached and functioning properly.
-
Replace any plastic covers or trim that were removed earlier.
That's it! Your new back seat driver side inner or outer seat belt buckle for your 2009-2012 Dodge Ram should now be installed and providing a safe and secure way to fasten the seat belt in the back seat of your vehicle.
VEHICLE FITMENT
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
| 2012 | Ram | 1500 | Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman, Tradesman HD | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2012 | Ram | 2500 | Laramie, Laramie Longhorn, Outdoorsman, Power Wagon, SLT, ST | 5.7L V8 - Bi-Fuel, 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2012 | Ram | 3500 | Laramie, Laramie Longhorn, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2011 | Ram | 1500 | Big Horn, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2011 | Ram | 2500 | Laramie, Laramie Longhorn, Power Wagon, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2011 | Ram | 3500 | Laramie, Laramie Longhorn, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2010 | Dodge | Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2010 | Dodge | Ram 2500 | Laramie, Power Wagon, SLT, ST, TRX | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2010 | Dodge | Ram 3500 | Laramie, SLT, ST | 6.7L L6 - Diesel |
| 2009 | Dodge | Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
This part will experience a 7-10 day delay before shipping out.
If you are in need of this part for a time sensitive repair, please text us at 832-722-4697 for availability before you order.
