The Ford Escape, Focus and Transit Connect Rear Bumper Parking Aid Sensor is a genuine OEM (original equipment manufacturer) auto part that is designed to assist with parking and reversing maneuvers. This high-quality sensor is manufactured to meet or exceed the standards set by Ford, ensuring a perfect fit and optimal performance. It comes unpainted, allowing for a better match with the color of the car.
To install the Ford Escape Focus Transit Connect (1) Rear Bumper Parking Aid Sensor Unpainted - Genuine New with your own screws, follow the steps below:
-
Park your vehicle on a flat surface and turn off the engine.
-
Locate the area on the rear bumper where the new parking aid sensor will be installed.
-
Carefully remove any existing sensors or covers from the bumper, if necessary.
-
Align the new parking aid sensor with the mounting holes on the bumper.
-
Insert a screw through each mounting hole and tighten them using a socket set or wrench. Be careful not to over-tighten the screws as this could damage the sensor.
-
Repeat these steps for any additional sensors that need to be installed.
-
Paint the sensor to match the color of your vehicle, if desired.
-
Test the new sensor by putting the vehicle in reverse and verifying that it beeps when an object is detected.
The skill level required for this installation is low to moderate, and it should take approximately 30-60 minutes to complete. You will need a socket set or wrench to install the sensor with your own screws. No special tools are required for this installation.
Important: Be sure to follow all safety precautions and manufacturer instructions carefully to avoid injury or damage to your vehicle. Also, make sure the new sensor is securely mounted and properly aligned with the bumper for accurate detection.
VEHICLE FITMENT
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
| 2018 | Ford | C-Max | Hybrid SE, Hybrid Titanium | 2.0L L4 - Electric/Gas |
| 2018 | Ford | Transit Connect | Titanium, XL, XLT | 2.5L L4 - CNG, 2.5L L4 - Gas, 2.5L L4 - LPG |
| 2017 | Ford | C-Max | Energi SE, Energi Titanium, Hybrid SE, Hybrid Titanium | 2.0L L4 - Electric/Gas |
| 2017 | Ford | Transit Connect | Titanium, XL, XLT | 2.5L L4 - CNG, 2.5L L4 - Gas, 2.5L L4 - LPG |
| 2016 | Ford | C-Max | Energi SEL, Hybrid SE, Hybrid SEL | 2.0L L4 - Electric/Gas |
| 2016 | Ford | Escape | S, SE, Titanium | 1.6L L4 - Gas, 2.0L L4 - Gas, 2.5L L4 - Gas |
| 2016 | Ford | Focus | ST | 2.0L L4 - Gas |
| 2016 | Ford | Transit Connect | Titanium, XL, XLT | 1.6L L4 - Gas, 2.5L L4 - CNG, 2.5L L4 - Gas, 2.5L L4 - LPG |
| 2015 | Ford | C-Max | Energi SEL, Hybrid SE, Hybrid SEL | 2.0L L4 - Electric/Gas |
| 2015 | Ford | Escape | S, SE, Titanium | 1.6L L4 - Gas, 2.0L L4 - Gas, 2.5L L4 - Gas |
| 2015 | Ford | Focus | ST | 2.0L L4 - Gas |
| 2015 | Ford | Transit Connect | Titanium, XL, XLT | 1.6L L4 - Gas, 2.5L L4 - CNG, 2.5L L4 - Gas, 2.5L L4 - LPG |
| 2014 | Ford | C-Max | Energi SEL, Hybrid SE, Hybrid SEL | 2.0L L4 - Electric/Gas |
| 2014 | Ford | Escape | S, SE, Titanium | 1.6L L4 - Gas, 2.0L L4 - Gas, 2.5L L4 - Gas |
| 2014 | Ford | Focus | Electric, S, SE, ST, Titanium | 2.0L L4 - Flex, 2.0L L4 - Gas, Electric |
| 2014 | Ford | Transit Connect | Titanium, XL, XLT | 1.6L L4 - Gas, 2.5L L4 - CNG, 2.5L L4 - Gas, 2.5L L4 - LPG |
| 2013 | Ford | C-Max | Energi SEL, Hybrid SE, Hybrid SEL | 2.0L L4 - Electric/Gas |
| 2013 | Ford | Escape | S, SE, SEL, Titanium | 1.6L L4 - Gas, 2.0L L4 - Gas, 2.5L L4 - Gas |
| 2013 | Ford | Focus | Electric, S, SE, ST, Titanium | 2.0L L4 - Flex, 2.0L L4 - Gas, Electric |
| 2012 | Ford | Focus | Electric, S, SE, SEL, Titanium | 2.0L L4 - Flex, 2.0L L4 - Gas, Electric |
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.