Important Note:
Fits the 2011-2014 Edge with a push-button start only.
Fits 2011-2015 Explorer or MKX with a push-button start only.
If you have to insert a key and turn it to start the vehicle this will not be the correct part.
Your Shifter must be on the floor for this to be correct.
Issue: Floor shift selector lever and push button start models may exhibit a Shift To Park message, Transmission Not In Park message displayed while the shifter is in park position, or unable to remove the integrated keyhead transmitter (IKT), or a discharged battery due to the Shift to Park light remaining illuminated.
Installation Instructions:
Tools Needed:
- Socket Set
- Torx bit set
- Screwdriver
- Pry tool
Skill Level: Intermediate
Installation Time: Approximately 1-2 hours
Note: Before starting the installation, ensure that the battery is disconnected to prevent accidental airbag deployment.
- Use a pry tool to carefully remove the center console trim covers to expose the shift park detent switch shifter assembly.
- Locate the wiring harness connector for the shift park detent switch shifter assembly and disconnect it by pressing down on the locking tab and pulling the connector away from the assembly.
- Use a socket set and Torx bit set to remove the bolts and screws securing the shift park detent switch shifter assembly to the center console.
- Carefully remove the old shift park detent switch shifter assembly from the center console.
- Install the new Genuine Ford shift park detent switch shifter assembly by aligning it with the mounting points on the center console and securing it with bolts and screws.
- Reconnect the wiring harness connector to the back of the new shift park detent switch shifter assembly.
- Reinstall the center console trim covers by snapping them back into place.
It is important to note that this installation requires intermediate-level skills and should not be attempted by individuals with limited automotive knowledge. The job can take approximately 1-2 hours to complete, depending on the installer's skill level and familiarity with the vehicle. Always make sure to reconnect the battery after completing the installation.
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.