The Engine Oil Dipstick Gauge for 2.4 Camry, Corolla, Highlander, and RAV4 is a crucial component for anyone looking to ensure their vehicle is running at its best. This OEM (original equipment manufacturer) part is specifically designed for use in 2.4 liter 4 cylinder Camry, Corolla, Highlander and RAV4 models. This means that you can trust that it will fit and function perfectly with your vehicle, unlike aftermarket or generic parts which may not offer the same level of compatibility or quality.
Installation Instructions:
-
Before starting, ensure that the engine is turned off, the key is removed from the ignition, and the car is parked on a level surface.
-
Locate the engine oil dipstick gauge on your 2.4 Camry, Corolla xB, or Matrix. It is typically located near the front of the engine, on the driver's side.
-
Using a pair of pliers or your fingers, gently pull the old dipstick out of its socket.
-
Inspect the old dipstick for any signs of damage or wear, and replace it if necessary.
-
Take the new genuine Toyota engine oil dipstick gauge and insert it into the same socket as the old one. Make sure it is pushed in all the way and aligned properly.
-
Pull the new dipstick out of the socket and wipe it clean with a rag or paper towel.
-
Reinsert the dipstick into the socket and push it in all the way.
-
Wait a few seconds and then pull the dipstick out again.
-
Check the oil level on the dipstick by looking at the markings on it. If the oil level is low, add the appropriate amount of oil. If the oil level is too high, drain some oil until it reaches the correct level.
-
Repeat this process as needed until the oil level is correct.
Tools Needed: Pliers, rag or paper towel.
Skill Level: Beginner.
Time Required: Less than 5 minutes.
VEHICLE FITMENT
Year | Make | Model | Body & Trim | Engine & Transmission |
---|---|---|---|---|
2015 | Scion | xB | Base | 2.4L L4 - Gas |
2014 | Scion | xB | Base | 2.4L L4 - Gas |
2013 | Scion | xB | Base | 2.4L L4 - Gas |
2013 | Toyota | Matrix | S | 2.4L L4 - Gas |
2012 | Scion | xB | Base | 2.4L L4 - Gas |
2012 | Toyota | Matrix | S | 2.4L L4 - Gas |
2011 | Scion | xB | Base | 2.4L L4 - Gas |
2011 | Toyota | Camry | Hybrid | 2.4L L4 - Electric\/Gas |
2011 | Toyota | Matrix | S | 2.4L L4 - Gas |
2010 | Scion | tC | Base | 2.4L L4 - Gas |
2010 | Scion | xB | Base | 2.4L L4 - Gas |
2010 | Toyota | Camry | Hybrid | 2.4L L4 - Electric\/Gas |
2010 | Toyota | Corolla | XRS | 2.4L L4 - Gas |
2010 | Toyota | Matrix | S, XRS | 2.4L L4 - Gas |
2009 | Scion | xB | Base | 2.4L L4 - Gas |
2009 | Toyota | Camry | Base, Hybrid, LE, SE, XLE | 2.4L L4 - Electric\/Gas, 2.4L L4 - Gas |
2009 | Toyota | Corolla | XRS | 2.4L L4 - Gas |
2009 | Toyota | Matrix | S, XRS | 2.4L L4 - Gas |
2008 | Scion | xB | Base | 2.4L L4 - Gas |
Our Genuine Part is brand new and has all the latest updates. The part is designed to never fail again. Of course, nothing is perfect, so we back it up with our industry-leading warranty in case something does go wrong. This part is made by the same company that made your vehicle, so you know it will be a 100% perfect fit every time, and the quality will be spot on.
Avoid the hassles of aftermarket and cheap imitation parts. Our Parts just fit right, and just work right every time.
Installation
Many of our customers are reporting an install time of around 20 minutes or less. This is really easy to install. If an installation video is available, you will find it here on this page. We are adding new videos all the time so check back later.
Does it fit my ________???
Our Parts are heavily researched and tested. They only fit what we say they will. Many parts look the same, but in reality, they are very different. Please do not purchase if your exact vehicle configuration is not listed, we can promise you it will not fit.
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.