2020-2023 Explorer or Aviator 3.0 Non Hybrid A/C Refrigerant Suction Hose

This Genuine OEM auto part is an A/C Refrigerant Suction Hose designed for 2020-2023 Ford Explorer and Lincoln Aviator models with a 3.0 engine. It is specifically tailored for non-hybrid versions. The hose facilitates the transfer of refrigerant in the air conditioning system, ensuring optimal cooling performance in the vehicle's interior.

This is a brand new genuine part in OEM manufacturer's packaging. It is not an aftermarket part, but the same exact piece you would purchase from a new car dealership.

Installation Instructions

Tools Needed:

A/C manifold gauge set, Adjustable wrench, Safety goggles, and gloves.

Steps:

1. Before beginning, park the vehicle on a flat surface and ensure the ignition is off.

2. Put on safety goggles and gloves to protect against any potential refrigerant release.

3. Using the A/C manifold gauge set, check the pressure in the A/C system. If pressure is detected, have the system professionally evacuated.

4. Locate the A/C refrigerant suction hose under the hood, typically near the compressor or evaporator.

5. Disconnect the existing suction hose by loosening any fittings or clamps using the adjustable wrench.

6. Remove the hose and replace it with the new Genuine OEM A/C Refrigerant Suction Hose.

7. Securely tighten all fittings or clamps to ensure no leaks will occur.

8. Once the hose is installed, have the A/C system vacuumed and recharged by a professional technician.

9. Test the A/C system for proper operation.

Duration: Installation typically takes about 45 minutes, excluding the vacuuming and recharging of the A/C system.

Skill Level: Intermediate

Vehicle Fitment

Year Range	Make	Model	Engine Type	Part Description
2020-2023	Ford	Explorer	3.0 Non-Hybrid	A/C Refrigerant Suction Hose
2020-2023	Lincoln	Aviator	3.0 Non-Hybrid	A/C Refrigerant Suction Hose