2018-2021 Ford Expedition Rear Parking / Trailer Assist Camera

Ford Expedition with factory trailer tow assist only. 

This is the rear camera and will not work on the front grille. 

This Genuine OEM auto part is designed to resolve the problem of impaired rear visibility and assist with parking and trailer maneuvers in the Ford Expedition. With its advanced technology, the rear parking/trailer assist camera provides a clear and wide-angle view of the area behind the vehicle, allowing the driver to navigate tight spaces and reverse with confidence.

The camera utilizes high-resolution imaging sensors and sophisticated image processing algorithms to deliver a crisp and detailed image on the vehicle's display screen. Its wide field of view ensures that blind spots are minimized, enabling the driver to detect obstacles or pedestrians that might be out of sight without this feature.

By incorporating this genuine OEM part into your Ford Expedition, you can enjoy the same level of quality and functionality as the cameras installed in new vehicles sold at the dealership. It is important to note that this part is not an aftermarket product but a brand new component in the original equipment manufacturer's packaging.

Installation Instructions

Skill Level Needed: Moderate

Tools Needed: Screwdriver, Trim panel removal tool, Socket wrench set, Wire crimping tool

1. Start by disconnecting the negative terminal of the vehicle's battery for safety.
2. Using a trim panel removal tool, gently pry off the interior trim panel located near the rear license plate to access the existing camera.
3. Unplug the electrical connector from the old camera and remove any mounting screws or bolts holding it in place.
4. Install the new genuine OEM camera in the same position, securing it with the appropriate screws or bolts.
5. Connect the electrical connector of the new camera to the corresponding vehicle harness, ensuring a secure connection.
6. Reinstall the interior trim panel by aligning it properly and applying gentle pressure until it snaps back into place.
7. Finally, reconnect the negative terminal of the battery.

The entire installation process typically takes around 30-60 minutes to complete, depending on your familiarity with automotive tasks and tools. It is recommended to refer to the vehicle's user manual or consult a professional if you encounter any difficulties during the installation.

Vehicle Fitment