2018-2021 Ford Expedition Front Grille Parking Assist Camera

Note, this is the Front camera and will not work on the back. 

Looking for a genuine and high-quality replacement for your 2018-2021 Ford Expedition front camera? Look no further than the Genuine OEM Front Camera. This product is designed to be an exact fit for your vehicle and is the same part that was originally installed at the factory. With this Genuine OEM part, you can trust that you are getting the highest quality replacement camera available on the market.

Installation Instructions:

Replacing the Front Camera on a 2018-2021 Ford Expedition is a straightforward process that can be completed with the right tools and knowledge. Here are the steps you need to follow to replace the existing camera with the new Genuine Ford part:

Tools needed:

• Flathead screwdriver
• Trim removal tool
• Socket wrench
• Torx bit set

Skill Level:

• Intermediate

Time Needed:

• Approximately 30-60 minutes

Step 1: Remove the old Front Camera

• Use the flathead screwdriver and trim removal tool to carefully pry off the plastic cover on the grille.
• Remove the screws holding the grille in place using the socket wrench.
• Gently pull the grille away from the vehicle to access the front camera.
• Using the Torx bit set, remove the screws holding the old camera in place.
• Disconnect the wiring harness from the old camera.

Step 2: Install the new Front Camera

• Connect the wiring harness to the new camera.
• Position the new camera in place and replace the screws using the Torx bit set.
• Carefully put the grille back in place and replace the screws using the socket wrench.
• Snap the plastic cover back into place on the grille using the flathead screwdriver and trim removal tool.

Step 3: Test the new camera

• Turn on the vehicle's ignition and test the new camera to ensure it is working correctly.
• Check the camera's angle and adjust it if necessary.

Step 4: Final Check

• Once you have installed the new camera and tested it, give it a final check to make sure it is secure and functioning correctly.

That's it! With these simple steps, you should be able to replace the old Front Camera on your 2018-2021 Ford Expedition with the new Genuine Ford part. Remember to take your time and be patient during the process. If you encounter any problems or have any questions, consult a professional mechanic for assistance.

Vehicle Fitment