2018-2021 Ford Expedition Front Front Passenger Side Lower Bumper Cover Grille Molding Adaptive Cruise Only

The 2018-2021 Ford Expedition Front Front Passenger Side Lower Bumper Cover Grille Molding Adaptive Cruise Only is a genuine OEM auto part that is designed to enhance the appearance and functionality of the front passenger side of your vehicle. This part is specifically designed for Ford Expedition models with the Adaptive Cruise Control option.

Installation Instructions:

1. Locate the front passenger side lower bumper cover grille molding on your 2018-2021 Ford Expedition. This should be on the lower front bumper, towards the outer edge of the vehicle.

2. Take the new genuine front passenger side lower bumper cover grille molding and inspect it for any damage or defects. Ensure that the molding is the correct size and shape for your vehicle and that it is designed for vehicles with adaptive cruise control only.

3. Using a flathead screwdriver or trim panel removal tool, carefully pry off any clips or fasteners that are holding the old grille molding in place. Be careful not to damage the surrounding area.

4. Carefully remove the old front passenger side lower bumper cover grille molding from the vehicle, taking care not to damage any of the connectors or surrounding components.

5. Take the new grille molding and position it in place on the lower front bumper. Ensure that it is aligned and flush with the surrounding panel.

6. Apply firm pressure to the grille molding to snap it into place. You should hear a clicking sound once the molding is securely attached.

7. Test the functionality of any remaining adaptive cruise control sensors or components on your vehicle by activating them from the driver's seat. Check for any leaks or malfunctions.

Overall, this job should take approximately 10-20 minutes to complete, depending on the skill level of the person performing the installation. This installation requires a moderate level of mechanical skill and knowledge, and should only be attempted by those who are comfortable working with automotive components. If you are unsure about any aspect of this installation, please consult a certified mechanic or professional installer.