2018-2020 Honda Accord Distance Sensor Milliwave Radar Cover

The 2018-2020 Honda Accord Distance Sensor Milliwave Radar Cover is a genuine, new replacement part for the distance sensor milliwave radar on the 2018-2020 Honda Accord. This radar cover is designed to protect the distance sensor milliwave radar on the vehicle and is manufactured to the same specifications and standards as the original equipment part.

Installation Instructions:

Replacing the 2018-2020 Honda Accord Distance Sensor Milliwave Radar Cover Genuine New requires the following tools:

• Phillips head screwdriver
• Plastic trim removal tool

Skill Level: Intermediate

Step 1: Remove the old cover Using the plastic trim removal tool, gently pry off the old cover from the distance sensor. There are plastic clips that hold the cover in place, so be careful not to break them.

Step 2: Disconnect the electrical connector Disconnect the electrical connector from the distance sensor by pressing the release tab and pulling it off.

Step 3: Remove the distance sensor Using the Phillips head screwdriver, remove the screws that secure the distance sensor to the vehicle. Once the screws are removed, gently pull the distance sensor out of the mounting bracket.

Step 4: Install the new cover Align the new cover with the distance sensor and push it firmly into place. You should hear a clicking sound when the cover snaps into place.

Step 5: Reinstall the distance sensor Insert the distance sensor back into the mounting bracket and secure it with the screws that you removed in step 3.

Step 6: Reconnect the electrical connector Connect the electrical connector back to the distance sensor by pressing it into place until you hear a clicking sound.

Step 7: Test the new cover Test the new cover to make sure it is securely in place and that the distance sensor works properly.

Estimated Time: 30-45 minutes.

ystems.

VEHICLE FITMENT