2017-2020 Ford F-250 F-350 Passenger Side Headlight Molding For Halogen Headlights

This is a brand new genuine OEM passenger side headlight molding for 2017-2020 Ford F-250 and F-350 trucks with halogen headlights. This molding is designed to fit perfectly and securely over the headlight assembly, providing protection and enhancing the appearance of the vehicle.

Installation Instructions

To replace the passenger side headlight molding, you will need the following tools: a socket wrench set and a plastic trim removal tool.

1. Open the hood of the truck and locate the headlight assembly on the passenger side.
2. Remove the two bolts that secure the top of the headlight assembly to the truck using a socket wrench.
3. Use a plastic trim removal tool to gently pry the old headlight molding away from the assembly.
4. Disconnect any wiring or connectors attached to the molding, if applicable.
5. Align the new headlight molding with the assembly and press it firmly into place.
6. Reconnect any wiring or connectors that were detached from the old molding.
7. Secure the top of the headlight assembly back onto the truck using the two bolts you removed earlier.
8. Repeat the process on the driver side if necessary.

This installation should take approximately 30-45 minutes and requires a moderate level of mechanical skill.

Vehicle Fitment