Skip to product information
1 of 5

2016-2023 Toyota Tacoma Towing Hitch Harness Connector 4 and 7 Wire

2016-2023 Toyota Tacoma Towing Hitch Harness Connector 4 and 7 Wire

Regular price $ 36.69 USD
Regular price Sale price $ 36.69 USD
Sale Sold out
Brand New Genuine OEM Part.

The Genuine 2016-2023 Tacoma Replacement For Factory Installed Towing Wire Harness Connector With 7pin/4pin Receptacle is a genuine OEM (original equipment manufacturer) auto part that is specifically designed to fit and function seamlessly with the 2016-2023 Toyota Tacoma models that have a factory installed towing wire harness. As an OEM product, you can trust that this connector will perfectly match the original equipment on your vehicle for an exact fit and finish.

It's important to note that this connector is a replacement for factory installed tow hitch wiring only and cannot be added to a Tacoma that did not come with a tow hitch from the factory.

Installation Instructions:

Tools required:

  • Flathead screwdriver
  • 10mm socket wrench
  • Torque wrench
  1. Locate the bumper hitch harness connector located on the driver's side of the rear bumper. It is located just above the hitch receiver.

  2. Using a flathead screwdriver, release the locking tab on the hitch harness connector by gently prying it open.

  3. Disconnect the hitch harness connector from the vehicle's wiring harness by pressing the release button on the connector and pulling it apart.

  4. Connect the new 4 and 7 wire receptacle to the vehicle's wiring harness by aligning the pins on the connector and pressing it firmly into place until you hear a click.

  5. Secure the new hitch harness connector to the rear bumper using the 10mm socket wrench to tighten the bolt that holds it in place.

  6. Use the torque wrench to tighten the bolt to the manufacturer's recommended torque specification.

  7. Test the hitch harness connector by attaching a trailer with working lights to ensure that all functions are working properly.

The installation of the Toyota Tacoma Bumper Towing Hitch Harness Connector typically takes about 30-45 minutes and requires moderate mechanical skill level.



View full details