2016-2017 Honda Accord 4 Door Front License Plate Holder - No Hardware

2016-2017 Accord 4 Door Front License Plate Holder - No Hardware 

Installation Instructions:

1. Begin by locating the front license plate holder on your 2016-2017 Honda Accord 4-door model. It is located on the front bumper of the vehicle.

2. If the old bracket is still attached to the vehicle, use a flathead screwdriver to carefully pry it off the bumper.

3. Once the old bracket is removed, inspect the area to ensure it is clean and free of any debris or damage.

4. Take the new license plate holder bracket and carefully align it with the mounting holes on the front bumper. Press it into place, making sure it is securely attached.

5. If no hardware is included, you will need to source the necessary screws and bolts to secure the bracket to the front bumper. These can be obtained at a local hardware store or auto parts store.

6. Use the screws and bolts to secure the bracket to the front bumper. Tighten them until they are snug, but be careful not to over-tighten as this may cause damage to the bracket or bumper.

Skill Level Needed:

Replacing the front license plate holder bracket on a 2016-2017 Honda Accord 4-door model requires basic automotive knowledge and experience. If you are comfortable performing minor repairs and modifications on your vehicle, you should be able to complete this installation without difficulty.

Time to Complete:

The installation process should take approximately 15-30 minutes to complete, depending on your level of experience and the tools you have available. It is recommended that you take your time and follow the instructions carefully to ensure a proper and secure fit.