2015-2020 Ford F-250 F-350 6.7 Diesel Exhaust Gas Temperature Sensor

The 2015-2020 Ford F-250 F-350 6.7 Diesel Exhaust Gas Temperature Sensor is a critical component of your vehicle's engine management system. This genuine OEM auto part is designed to work seamlessly with your Ford diesel engine, providing accurate and reliable temperature readings of the exhaust gas.

Installation Instructions:

1. Ensure that the engine is cool and has not been running for at least 30 minutes prior to installation.
2. Locate the exhaust gas temperature (EGT) sensor on the exhaust pipe.
3. Disconnect the electrical connector from the EGT sensor by pressing down on the locking tab and pulling the connector apart.
4. Use a wrench to loosen and remove the EGT sensor from the exhaust pipe.
5. Clean the threads on the new EGT sensor and apply a small amount of anti-seize compound to the threads.
6. Thread the new EGT sensor into the exhaust pipe and tighten it to the specified torque value, typically around 15-20 ft-lbs.
7. Reconnect the electrical connector to the EGT sensor.
8. Clear any diagnostic trouble codes (DTCs) that may have been stored in the vehicle's computer by using a scan tool or disconnecting the battery for a few minutes.
9. Start the engine and verify that there are no warning lights illuminated on the dashboard.

Estimated time for installation: 30 minutes Skill level: Intermediate Tools needed: Wrench, anti-seize compound