2014-2020 Acura MDX Rear Door Lock Cable OEM

Are you experiencing issues with the rear door lock on your 2014-2020 Acura MDX? Look no further than this Genuine Acura Rear Door Lock Cable!

This lock cable is an exact replica of the one that originally came with your vehicle, ensuring a perfect fit and optimal performance. It is a brand new, genuine Acura part, manufactured by the original equipment manufacturer (OEM) to ensure the highest quality and durability.

This lock cable is responsible for connecting the door lock mechanism to the door handle, allowing you to lock and unlock the rear door. Without it, the rear door may not lock or unlock properly or at all, compromising the security of your vehicle.

To install a genuine new rear door lock cable on a 2014-2020 Acura MDX, you can follow these steps:

1. First, open the rear door on the side where you will be replacing the lock cable.

2. Locate the lock mechanism inside the door. The lock cable is connected to the mechanism and runs along the interior of the door.

3. Use a trim removal tool to carefully pry off the door panel on the inside of the door. Start at the bottom of the panel and work your way up, releasing the clips that hold the panel in place.

4. Once the panel is removed, you should be able to see the lock mechanism and the lock cable. Locate the end of the cable where it connects to the lock mechanism.

5. Use pliers to carefully disconnect the old lock cable from the lock mechanism. You may need to wiggle it back and forth a bit to release it.

6. Next, locate the other end of the lock cable, which is connected to the exterior door handle. Carefully remove the clip that holds the cable in place.

7. With both ends of the cable disconnected, you should be able to remove the old cable from the door.

8. Take the new genuine lock cable and thread it along the interior of the door, following the path of the old cable.

9. Connect the new cable to the lock mechanism and the exterior door handle, making sure the connections are secure.

10. Finally, replace the door panel by aligning it with the clips and pressing it firmly into place.

11. Test the new lock cable by locking and unlocking the door from the inside and outside.

That's it! Your new genuine rear door lock cable should now be installed and working properly on your Acura MDX.

VEHICLE FITMENT