82620-33070-E18 2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link
82620-33070-E18 2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link
82620-33070-E18 2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link

2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link Block

Vendor: Toyota
Availability: In Stock
$ 23.86
$ 23.86
Same-Day Shipping
Get same-day shipping on most orders placed by 2pm Central Time.
82620-33070-E18 2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link

2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link Block

$ 23.86

2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link Block

$ 23.86

 

The 2013-2018 Avalon or 2012-2017 Camry 3.5 Fuse Fusible Link Block is a crucial component for anyone looking to ensure their vehicle's electrical system is working properly. This Genuine OEM part is specifically designed for use in 2013-2018 Avalon and 2012-2017 Camry models with 3.5-liter engines. This means that you can trust that it will fit and function perfectly with your vehicle, unlike aftermarket or generic parts which may not offer the same level of compatibility or quality.

Installation Instructions:

  1. Before starting, ensure that the vehicle is parked on a flat and stable surface, and all occupants have vacated the area.

  2. Locate the fuse fusible link block on your 2013-2018 Avalon or 2012-2017 Camry 3.5. It is typically located in the engine compartment, near the battery.

  3. Using a socket wrench, disconnect the negative terminal of the battery to avoid any electrical shocks.

  4. Using a flat-head screwdriver, pry open the cover of the old fuse fusible link block.

  5. Carefully remove the old block from its housing by disconnecting any electrical connectors that are attached to it.

  6. Take the new fuse fusible link block and position it in the same location as the old one. Ensure that it is aligned properly and oriented correctly.

  7. Connect any electrical connectors that are attached to the new block.

  8. Snap the cover of the new block into place by pressing down on it until it clicks.

  9. Reconnect the negative terminal of the battery and ensure that it is tightened properly.

  10. Turn on the engine and test all electrical systems to make sure they are functioning properly.

  11. Once you are satisfied with the installation, replace any trim pieces that were removed and clean up any debris.

Tools Needed: Socket wrench, flat-head screwdriver.

Skill Level: Intermediate.

Time Required: 30-45 minutes.

 

 

 

Easy No Hassle Return Information

Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.

 

What can not be returned:

 

Any part that does not have all of the original packaging with the attached manufacturer part number label.

Believe it or not, this is super important! Don't throw away the packaging.  Manufacturers wont accept returns on a part without the genuine OEM Packaging, so we wont be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).

 

 

We also cannot accept your return if: 

  • You have installed or attempted to install or disassemble the part
  • You have painted the part.
  • You have broken the part.
  • You have lost the original packaging.
  • You have gotten the part wet, or the part has greasy fingerprints.

 

Electrical Parts.

Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.

 An electrical part is any part that plugs in, contains a switch, sensor, circuit board or electrical wiring.

 

Here are 2 examples of what a part number label looks like. if you Do not have the packaging with your part number similar to this we can't accept your return

 

 

 

 

HOW TO RETURN

NOTE: YOU DO NOT HAVE TO CONTACT US TO MAKE A RETURN.

  

  1. Make sure you have all the original packaging with part number labels as shown above.

 

  1. Please be sure to put a copy of the receipt or order confirmation email in the box.

 

  1. Go to the post office or UPS Store where you can pay them for the postage directly. We reccomend using UPS. The US postal service is slow and unreliable in our area,

 

Make sure you get a tracking number before you leave the store. Buying insurance is usually a good idea. We cannot be responsible for any return that is lost or damaged in transit.

 

SEND YOUR PACKAGE BACK TO THE FOLLOWING ADDRESS.

 

Conquest Auto Parts

1320 HWY 3 SOUTH, SUITE C4

 LEAGUE CITY, TX 77573

 

What Happens Next?

 

Check your tracking number to see when we receive your return.

Once we receive your return we will inspect it and issue a credit to your original payment method usually the same or next business day. We will send you an email or text once the credit has been issued. 

It is important to note that even though we issue the credit, your bank who manages your credit card may hold your refund for up to 7 days before posting it to your account. This is done by your bank, and is standard procedure no matter where you buy from online. You can contact your bank for their policies.

 

Refunds

  • You should receive your credit within 3-5 Business days of the date we receive the return.
  • Credit will be applied to the same credit card or account used to purchase the part.
  • Your Credit will be for the purchased item only. We do not refund the original shipping charge.

Related Products

Recently Viewed Products