Sold out
Click to zoom in
Are you looking to improve the performance and longevity of your 2011-2016 Ford F-250 or F-350 with 6.7 diesel engine? The Genuine OEM Transmission Oil Cooler is the solution you need!
Installation Instructions:
Tools Needed:
- Socket Set
- Torque wrench
- Drain pan
- Hose clamp pliers
- Transmission fluid funnel
Skill Level: Intermediate
Installation Time: Approximately 2-3 hours
Note: Before starting the installation, ensure that the engine is cool to the touch and the vehicle is parked on a level surface.
- Locate the transmission oil cooler on your 2011-2016 Ford F-250 F-350 6.7 Diesel. It is typically located in front of the radiator and behind the grille.
- Use hose clamp pliers to loosen the clamps securing the transmission cooler lines to the cooler.
- Place a drain pan underneath the cooler and disconnect the transmission cooler lines by carefully pulling them away from the cooler.
- Use a socket set to remove the bolts securing the old transmission oil cooler to the vehicle.
- Carefully remove the old transmission oil cooler from the vehicle.
- Install the new transmission oil cooler onto the vehicle by aligning it with the mounting points and securing it with bolts.
- Reconnect the transmission cooler lines to the new transmission oil cooler and secure them with hose clamps.
- Refill the transmission fluid using a funnel and the manufacturer's recommended transmission fluid.
- Start the engine and allow it to idle for a few minutes while checking for any leaks.
- Check the transmission fluid level and add more if necessary.
It is important to note that this installation requires intermediate-level skills and should not be attempted by individuals with limited automotive knowledge. The job can take approximately 2-3 hours to complete, depending on the installer's skill level and familiarity with the vehicle. Always use the manufacturer's recommended transmission fluid and torque specifications when completing this installation.
THIS PART FITS
| Make | Model | Year | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
| Ford | F-250 Super Duty | 2016 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-250 Super Duty | 2015 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-250 Super Duty | 2014 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-250 Super Duty | 2013 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-250 Super Duty | 2012 | King Ranch, Lariat, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-250 Super Duty | 2011 | King Ranch, Lariat, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2016 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2015 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2014 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2013 | King Ranch, Lariat, Platinum, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2012 | King Ranch, Lariat, XL, XLT | 6.7L V8 - Diesel |
| Ford | F-350 Super Duty | 2011 | King Ranch, Lariat, XL, XLT | 6.7L V8 - Diesel |
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.