2011-2016 Ford F-250 F-350 6.7 Diesel Fuel Fuel Pump And Sender Assembly

The 2011-2016 Ford F-250 F-350 6.7 Diesel Fuel Fuel Pump And Sender Assembly is a critical component in ensuring the performance and reliability of your diesel engine's fuel system. This genuine OEM auto part is specifically designed for the 2011-2016 Ford F-250 F-350 6.7 Diesel engine, providing an exact fit and dependable performance.

Installation Instructions:

Tools needed:

• Socket set
• Wrench set
• Pliers
• Screwdrivers
• Fuel line disconnect tool
• Safety goggles
• Work gloves
• Drain pan

Skill level: Intermediate

Estimated time: 2-3 hours

1. Turn off the engine and allow the fuel system to cool down.
2. Locate the fuel tank and remove the fuel tank shield if necessary.
3. Relieve fuel pressure by removing the fuel pump fuse or relay and starting the engine until it stalls.
4. Disconnect the negative battery cable to prevent any electrical shocks or sparks.
5. Locate the fuel pump and sender assembly.
6. Disconnect the fuel lines and electrical connections from the fuel pump and sender assembly using the appropriate tools.
7. Remove the screws or bolts that secure the fuel pump and sender assembly to the fuel tank.
8. Carefully remove the old fuel pump and sender assembly from the fuel tank.
9. Place the new fuel pump and sender assembly into the fuel tank and secure it with screws or bolts.
10. Reconnect the fuel lines and electrical connections to the new fuel pump and sender assembly.
11. Reconnect the negative battery cable.
12. Turn on the engine and check for any leaks or unusual noises.
13. If everything looks good, replace the fuel pump fuse or relay and test drive the vehicle.

Note: Always follow proper safety procedures when working with fuel systems. Use caution when working with fuel and avoid smoking or any other potential sources of ignition.