2005-2010 Honda Odyssey Passenger Side Power Sliding Door Center Roller Hinge

The Genuine OEM Honda Passenger Side Power Sliding Door Center Roller Hinge for the 2005-2010 Honda Odyssey is an essential component in the proper functioning of your vehicle's power sliding door. The center roller hinge helps to support the weight of the sliding door and allows it to move smoothly and quietly, it also keeps the door in the correct alignment.

Installation Instructions:

Important Note: Before beginning the installation process, make sure that the replacement part matches the one being replaced in terms of make, model, and specifications.

Tools Needed:

• Socket wrench set
• Flathead screwdriver
• Phillips head screwdriver

Skill Level: Intermediate

Time Needed: 1-2 hours

Steps:

1. Start by locating the passenger side power sliding door center roller hinge. It is usually located on the inside of the door, near the center.
2. Use a socket wrench set to remove the bolts that hold the old hinge in place. Keep the bolts and nuts aside in a safe place, as they will be needed later.
3. Once the old hinge has been removed, use a flathead screwdriver to gently pry off any remaining clips or fasteners that may still be attached to the door.
4. Take the new hinge and align it with the holes where the old hinge was attached. Make sure it is centered properly.
5. Use the bolts and nuts that were removed earlier to attach the new hinge to the door. Tighten them securely with a socket wrench set.
6. Test the new hinge by opening and closing the sliding door a few times to make sure it is functioning properly.
7. If everything is working as expected, use a Phillips head screwdriver to reattach any clips or fasteners that were removed earlier.

That's it! The replacement process is now complete. Remember to dispose of the old hinge in an environmentally responsible manner.