1998-2004 Toyota Tacoma A/C Tube From Condenser To Drier

1998-2004 Toyota Tacoma A/C Tube From Condenser To Drier.

Installation Instructions:

1. Locate the A/C tube that runs from the condenser to the drier on your Toyota Tacoma.
2. Locate the connection points at both ends of the A/C tube.
3. Using a wrench, carefully loosen and remove the bolts or nuts securing the A/C tube to the connection points at both ends.
4. Carefully remove the old A/C tube and set it aside.
5. Take the new A/C tube and carefully install it in the same position as the old one, making sure to align the connection points properly.
6. Using a wrench, tighten the bolts or nuts on both ends of the A/C tube to secure it in place.
7. Double-check all connections and ensure that the A/C tube is properly secured.
8. Recharge your A/C system with refrigerant if necessary.

Estimated Time: 1-2 hours Skill Level: Intermediate Tools Needed: Wrenches