Nissan Armada GT-R Quest Cube Murano Steering Wheel Clockspring

Only For vehicles without a heated steering wheel 

The Nissan Armada GT-R Quest Cube Murano Steering Wheel Clockspring is a genuine OEM auto part that is designed to fit a variety of Nissan models including the Armada, GT-R, Quest, Cube, and Murano. This part is responsible for maintaining the electrical connection between the steering wheel and the vehicle's computer, allowing the steering wheel-mounted controls to function properly.

Installation Instructions:

Important Note: Before beginning the installation process, make sure that the replacement part matches the one being replaced in terms of make, model, and specifications. Also, disconnect the negative battery cable before starting the installation process.

Tools Needed:

• Socket wrench set
• Torx screwdriver set
• Flathead screwdriver
• Phillips head screwdriver
• Needle nose pliers

Skill Level: Advanced

Time Needed: 2-3 hours

Steps:

1. Start by removing the airbag from the steering wheel. To do this, use a Torx screwdriver to remove the screws that hold the airbag in place. Once the screws are removed, gently pry the airbag away from the steering wheel.
2. Locate the clockspring and unplug the electrical connector that connects it to the vehicle.
3. Use a socket wrench set to remove the bolts that hold the steering wheel to the steering column. Keep the bolts aside in a safe place.
4. Carefully pull the steering wheel away from the steering column to access the clockspring.
5. Use a flathead screwdriver to remove any clips or fasteners that hold the clockspring in place.
6. Take the new clockspring and carefully align it with the steering wheel and steering column. Make sure it is centered properly.
7. Reattach any clips or fasteners that hold the clockspring in place using a Phillips head screwdriver.
8. Reattach the steering wheel to the steering column using the bolts that were removed earlier. Tighten them securely with a socket wrench set.
9. Plug in the electrical connector to the clockspring.
10. Reinstall the airbag by gently pressing it back into place and securing it with the Torx screws.
11. Reconnect the negative battery cable.

That's it! The installation process is now complete. Remember to test the clockspring by turning the steering wheel in both directions to make sure it is functioning properly.

VEHICLE FITMENT