Engine Oil Dipstick Gauge For 2010-2021 1.8 Corolla or Prius

The Engine Oil Dipstick Gauge for 2010-2021 1.8 Corolla or Prius is a crucial component for anyone looking to ensure their vehicle is running at its best. This OEM (original equipment manufacturer) part is specifically designed for use in 2010-2021 1.8 liter 4 cylinder Corolla or Prius models. This means that you can trust that it will fit and function perfectly with your vehicle, unlike aftermarket or generic parts which may not offer the same level of compatibility or quality.

Installation Instructions:

1. Before starting, ensure that the engine is turned off, the key is removed from the ignition, and the car is parked on a level surface.

2. Locate the engine oil dipstick gauge on your 2010-2021 Toyota Corolla or Prius. It is typically located near the front of the engine, on the driver's side.

3. Using a pair of pliers or your fingers, gently pull the old dipstick out of its socket.

4. Inspect the old dipstick for any signs of damage or wear, and replace it if necessary.

5. Take the new genuine Toyota engine oil dipstick gauge and insert it into the same socket as the old one. Make sure it is pushed in all the way and aligned properly.

6. Pull the new dipstick out of the socket and wipe it clean with a rag or paper towel.

7. Reinsert the dipstick into the socket and push it in all the way.

8. Wait a few seconds and then pull the dipstick out again.

9. Check the oil level on the dipstick by looking at the markings on it. If the oil level is low, add the appropriate amount of oil. If the oil level is too high, drain some oil until it reaches the correct level.

10. Repeat this process as needed until the oil level is correct.

Tools Needed: Pliers, rag or paper towel.

Skill Level: Beginner.

Time Required: Less than 5 minutes.

VEHICLE FITMENT

Our Genuine Part is brand new and has all the latest updates. The part is designed to never fail again. Of course, nothing is perfect, so we back it up with our industry-leading warranty in case something does go wrong. This part is made by the same company that made your vehicle, so you know it will be a 100% perfect fit every time, and the quality will be spot on.

Avoid the hassles of aftermarket and cheap imitation parts. Our Parts just fit right, and just work right every time.

Installation

Many of our customers are reporting an install time of around 20 minutes or less. This is really easy to install.  If an installation video is available, you will find it here on this page. We are adding new videos all the time so check back later.

Does it fit my ________???

Our Parts are heavily researched and tested. They only fit what we say they will. Many parts look the same, but in reality, they are very different. Please do not purchase if your exact vehicle configuration is not listed, we can promise you it will not fit.