Ranger Edge/Escape/Explorer Ignition Coil Ford/Motorcraft 2.0 Engine

The Ranger Edge Escape Explorer Ignition Coil for the 2.0 Engine is a genuine Ford/Motorcraft product designed to ensure reliable performance in your vehicle. This genuine OEM auto part is an essential component in the ignition system, responsible for providing the high voltage necessary to ignite the fuel and air mixture in the engine's cylinders. Using an aftermarket or imitation ignition coil may result in poor engine performance, misfires, or even complete engine failure.

Installation Instructions:

1. Start by disconnecting the negative battery cable to avoid any electrical shocks or damage.
2. Locate the ignition coil on the engine, it will be attached to the spark plug.
3. Remove the electrical connector from the old ignition coil and set it aside.
4. Use a wrench or socket to remove the mounting bolts that hold the ignition coil in place.
5. Gently pull the old ignition coil out of the engine.
6. Insert the new ignition coil into the same spot where the old one was removed from.
7. Tighten the mounting bolts securely to ensure the new ignition coil is held in place properly.
8. Reattach the electrical connector to the new ignition coil.
9. Reconnect the negative battery cable.
10. Turn the engine on and ensure the new ignition coil is functioning properly.

Time and Skill Level: The installation process should take around 30 minutes to complete. It is considered an easy job that can be done by someone with basic mechanical skills.

Tools Needed:

• Wrench or socket set

VEHICLE FITMENT