2013-2022 Buick Encore AWD Driver SIde Rear ABS Sensor

Are you experiencing issues with your Buick Encore's ABS system? It's time to replace your faulty Driver Side Rear ABS Sensor with the Genuine New 94544441 part for your 2013-2022 Buick Encore AWD. This high-quality sensor is responsible for measuring the speed of your vehicle's wheels and sending this information to the ABS system to ensure optimal brake performance and traction control.

Installation Instructions:

The Driver Side Rear ABS Sensor is an OEM replacement part for the 2013-2022 Buick Encore AWD. Here are the steps you need to follow to install the new sensor:

Tools needed:

• Jack
• Jack stands
• Lug wrench
• Socket wrench
• Socket set
• Torque wrench

Skill Level:

• Intermediate

Time Needed:

• Approximately 45-60 minutes

Step 1: Prepare the Vehicle

• Park the vehicle on a level surface and engage the parking brake.
• Loosen the lug nuts on the driver side rear wheel with a lug wrench.
• Use a jack to lift the vehicle and place jack stands under the frame.
• Remove the lug nuts and the wheel to access the sensor.

Step 2: Remove the Old Sensor

• Locate the old ABS sensor on the driver side rear wheel hub.
• Unplug the electrical connector from the sensor.
• Use a socket wrench and socket set to remove the bolt that secures the sensor to the hub.
• Carefully remove the old sensor from the hub and set it aside.

Step 3: Install the New Sensor

• Take the new ABS sensor and align it with the mounting hole on the hub.
• Use a socket wrench and socket set to secure the sensor to the hub with the bolt.
• Reconnect the electrical connector to the sensor.

Step 4: Test the New Sensor

• Lower the vehicle from the jack stands and remove the jack.
• Use a torque wrench to tighten the lug nuts to the manufacturer's recommended torque specifications.
• Test drive the vehicle to make sure the new ABS sensor is working properly.

That's it! With these steps, you should be able to replace the old Driver Side Rear ABS Sensor on your 2013-2022 Buick Encore AWD with the new Genuine GM part. Remember to take your time and be careful when removing and installing the sensor to avoid damaging the vehicle or the new part.