2008-2020 Toyota Sequoia Fusible Link Block

The 2008-2020 Toyota Sequoia Fusible Link Block is a crucial component for anyone looking to ensure their vehicle is running at its best. This Genuine OEM part is specifically designed for use in 2008-2020 Toyota Sequoia models. It serves as a central location where multiple fusible links can be connected to the electrical system and protect it from electrical overcurrent and short circuit.

Installation Instructions:

1. Before starting, ensure that the engine is turned off, the key is removed from the ignition, and all electrical accessories are turned off.

2. Locate the fusible link block on your 2008-2020 Toyota Sequoia. It is typically located near the battery and will be a small box with a cover.

3. Using a wrench or pliers, disconnect the negative terminal of the battery to avoid any electrical shocks.

4. Carefully remove the cover of the fusible link block by prying it off with a flat-head screwdriver or gently lifting it with your fingers.

5. Remove the old fusible link block by pulling it out of the socket. Take note of its orientation and location for future reference.

6. Insert the new genuine Toyota fusible link block into the socket, ensuring that it is aligned properly and oriented correctly.

7. Replace the cover of the fusible link block, making sure that it is securely in place.

8. Reconnect the negative terminal of the battery and ensure that it is tightened properly.

9. Turn on the engine and check to make sure that all electrical systems are working properly.

Tools Needed: Wrench or pliers, flat-head screwdriver.

Skill Level: Intermediate.

Time Required: 20-30 minutes.