The Toyota Yaris or Scion xD Fuel Gauge Sending Unit Level Sensor Float is a genuine OEM auto part that is designed to fit the Toyota Yaris and the Scion xD. This sensor is responsible for determining the level of fuel in the fuel tank and sending a signal to the fuel gauge, allowing the driver to accurately monitor the fuel level.
Here are the installation instructions for the Toyota Yaris or Scion xD Fuel Gauge Sending Unit Level Sensor Float Genuine New:
Installation Instructions:
Important Note: Before beginning the installation process, make sure that the replacement part matches the one being replaced in terms of make, model, and specifications. Also, be sure to work in a well-ventilated area and away from any open flames or sources of ignition.
Tools Needed:
- Socket wrench set
- Flathead screwdriver
- Pliers
- Rubber mallet
- Fuel-resistant sealant
Skill Level: Intermediate
Time Needed: 1-2 hours
Steps:
- Locate the fuel pump assembly, which is usually located inside the fuel tank. To access the fuel pump assembly, you may need to remove the rear seat cushion and the fuel tank access panel.
- Use a socket wrench set to remove the bolts or screws that hold the fuel pump assembly in place.
- Carefully lift the fuel pump assembly out of the fuel tank, being careful not to damage any of the fuel lines or electrical connections.
- Locate the fuel gauge sending unit level sensor float and use a flathead screwdriver to remove the retaining clip that holds it in place.
- Gently remove the old fuel gauge sending unit level sensor float from the fuel pump assembly.
- Install the new fuel gauge sending unit level sensor float onto the fuel pump assembly and secure it with the retaining clip.
- Carefully lower the fuel pump assembly back into the fuel tank and secure it with the bolts or screws that were removed earlier. Be sure to tighten the bolts or screws to the manufacturer's specifications.
- Reinstall the fuel tank access panel and the rear seat cushion.
- Turn on the ignition to check the fuel gauge and make sure it is reading accurately.
- Apply a small amount of fuel-resistant sealant to the fuel pump assembly gasket to prevent leaks.
That's it! The installation process is now complete. Remember to dispose of any old parts and materials in an environmentally responsible manner.
Part Fitment
| Year Make Model | Trim & Engine | Important vehicle option details |
|---|---|---|
| 2008-2014 Scion xD | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZSP110L-AHMRKA, ZSP110L-AHMRKK, ZSP110L-AHPRKA, ZSP110L-AHPRKK |
| 2006-2018 Toyota Yaris | RS, STD|4 Cyl 1.5L | 1NZFE; 1NZFE; NCP131L-AGMRKA, |
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.