2004-2009 Mazda 3 Brake Pedal Stop Lamp Switch

The Mazda 2 / 3 / 5 / 6 / CX-5 Brake Pedal Stop Lamp Switch is a crucial component of your vehicle's braking system. This Genuine OEM part is designed to activate the brake lights when the brake pedal is pressed, ensuring that other drivers are aware that you are braking, improving visibility and safety while driving.

Important Note: Before beginning the installation process, make sure that the replacement part matches the one being replaced in terms of make, model, and specifications.

Tools Needed:

• Socket wrench set
• Phillips head screwdriver

Skill Level: Intermediate

Time Needed: 30-45 minutes

Steps:

1. Locate the brake pedal stop lamp switch under the dashboard on the driver's side of the vehicle.
2. Disconnect the electrical connector that is attached to the old brake pedal stop lamp switch.
3. Use a socket wrench set to remove the nut that secures the old brake pedal stop lamp switch to the brake pedal assembly.
4. Remove the old brake pedal stop lamp switch from the brake pedal assembly.
5. Take the new brake pedal stop lamp switch and carefully align it with the mounting location on the brake pedal assembly.
6. Insert the bolt through the hole in the new brake pedal stop lamp switch and tighten it securely with a socket wrench set.
7. Reconnect the electrical connector to the new brake pedal stop lamp switch.
8. Test the new brake pedal stop lamp switch by pressing the brake pedal down and observing the stop lamp function.
9. Adjust the position of the new brake pedal stop lamp switch if necessary to ensure proper function.
10. Replace any panels or coverings that were removed during the installation process.

That's it! The installation process is now complete. Remember to dispose of any old parts and materials in an environmentally responsible manner.

VEHICLE FITMENT