Kia Forte or Sportage Front Turn Signal Lamp Bulb Socket

The Kia Forte and Sportage are both popular vehicles known for their performance and reliability. However, even the best vehicles need replacement parts from time to time, and the front turn signal lamp bulb socket is one component that can wear out or fail over time. That's where the Kia Forte or Sportage Front Turn Signal Lamp Bulb Socket comes in.

Installation Instructions:

Tools Needed:

• Pliers
• Flathead screwdriver

Installation Steps:

1. Turn off the engine and take out the keys from the ignition.
2. Open the hood and locate the turn signal lamp assembly on the driver or passenger side of the vehicle.
3. Remove the turn signal lamp assembly by gently pulling it out towards you.
4. Locate the bulb socket that needs to be replaced and turn it counterclockwise to remove it from the lamp assembly.
5. Disconnect the wiring harness from the bulb socket by pulling it straight out.
6. Take the new bulb socket and connect the wiring harness to it.
7. Place the new bulb socket into the turn signal lamp assembly and turn it clockwise until it locks in place.
8. Replace the turn signal lamp assembly back into its original position by pushing it in until it clicks.
9. Test the turn signal to make sure it is working properly.

Note: Make sure to handle the bulb socket carefully and avoid touching the bulb with your bare hands to prevent oil or grease from damaging the bulb. Use a clean cloth or gloves when handling the bulb.

VEHICLE FITMENT