Click to zoom in
If you're in need of a new blower motor with fan for your Ford Fiesta or EcoSport, this genuine OEM (original equipment manufacturer) auto part is the perfect solution.
The blower motor with fan plays a crucial role in the heating and cooling system of your Ford Fiesta or EcoSport. It is responsible for blowing air through the vents and into the cabin of your vehicle, ensuring that you stay comfortable while driving. Without a properly functioning blower motor with fan, you may not be able to regulate the temperature inside your vehicle, which can be uncomfortable in extreme temperatures.
This genuine OEM blower motor with fan is the exact same part that is sold at new car dealerships, ensuring a perfect fit and function with your Ford Fiesta or EcoSport. It is made of high-quality materials that are designed to withstand the rigors of everyday use, and last for years to come.
It is important to note that the blower motor is responsible for blowing the air, while the fan is the component that causes the motor to rotate, thus creating the airflow. When the fan fails, the motor will not blow air and the opposite when the motor fails, the fan will not spin.
One of the most important things to consider when purchasing a replacement auto part is whether it is genuine or aftermarket. Aftermarket parts may be cheaper, but they are not always manufactured to the same standards as genuine OEM parts. They may not fit as well or function as well as the original parts that came with your car.
To install the Ford Fiesta or Ecosport New Genuine Blower Motor with Fan, follow the steps below:
-
Park your vehicle on a flat surface and turn off the engine.
-
Open the hood and locate the blower motor assembly that needs to be replaced.
-
Disconnect the electrical connector that powers the blower motor.
-
Remove the bolts or screws that are holding the old blower motor assembly in place using a socket set or a wrench.
-
Carefully take out the old blower motor assembly from the vehicle and dispose of it properly.
-
Install the new blower motor assembly in the same location as the old one.
-
Secure the new blower motor assembly in place using the bolts or screws that you removed earlier.
-
Reconnect the electrical connector that powers the blower motor.
-
Turn on the engine and test the new blower motor assembly to ensure that it is functioning properly.
The skill level required for this installation is low to moderate, and it should take approximately 30-60 minutes to complete. You will need a socket set or a wrench to remove the bolts or screws that are holding the old blower motor assembly in place. No special tools are required for this installation.
Important: Be sure to follow all safety precautions and manufacturer instructions carefully to avoid injury or damage to your vehicle.
VEHICLE FITMENT
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
| 2021 | Ford | EcoSport | S, SE, SES, Titanium | 1.0L L3 - Gas, 2.0L L4 - Gas |
| 2020 | Ford | EcoSport | S, SE, SES, Titanium | 1.0L L3 - Gas, 2.0L L4 - Gas |
| 2019 | Ford | EcoSport | S, SE, SES, Titanium | 1.0L L3 - Gas, 2.0L L4 - Gas |
| 2019 | Ford | Fiesta | S, SE, ST, ST Line | 1.6L L4 - Gas |
| 2018 | Ford | EcoSport | S, SE, SES, Titanium | 1.0L L3 - Gas, 2.0L L4 - Gas |
| 2018 | Ford | Fiesta | S, SE, ST, Titanium | 1.6L L4 - Gas |
| 2017 | Ford | Fiesta | S, SE, ST, Titanium | 1.0L L3 - Gas, 1.6L L4 - Gas |
| 2016 | Ford | Fiesta | S, SE, ST, Titanium | 1.0L L3 - Gas, 1.6L L4 - Gas |
| 2015 | Ford | Fiesta | S, SE, ST, Titanium | 1.0L L3 - Gas, 1.6L L4 - Gas |
| 2014 | Ford | Fiesta | S, SE, ST, Titanium | 1.0L L3 - Gas, 1.6L L4 - Gas |
| 2013 | Ford | Fiesta | S, SE, Titanium | 1.6L L4 - Gas |
| 2012 | Ford | Fiesta | S, SE, SEL, SES | 1.6L L4 - Gas |
| 2011 | Ford | Fiesta | S, SE, SEL, SES | 1.6L L4 - Gas |
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.