The 2019-2020 Dodge Ram 1500 DT Driver Front Door Module is a genuine OEM (original equipment manufacturer) auto part that is specifically designed to resolve a common problem that many Ram 1500 DT owners experience. The problem is that the door module on these vehicles can become damaged or malfunction over time, which can cause the power windows and mirrors to not work properly or stop working altogether.

Installing a driver front door module for 1 touch power windows and folding mirrors in a 2019-2020 Dodge Ram 1500 DT requires the following steps:

1. Begin by disconnecting the negative battery cable to avoid any electrical shorts or damage.

2. Remove the door panel. Start by prying off any covers or trim pieces to access any screws that are holding the panel in place. Then, remove all screws from the panel and gently pull it away from the door to release the clips. Disconnect any electrical connectors as necessary.

3. Locate the old door module, which should be located behind the door panel. Disconnect any electrical connectors that are attached to it.

4. Remove any screws that are securing the old module to the door, then pull the module out of the door.

5. Take the new driver front door module and connect any electrical connectors to it. Be sure to double-check that the connectors are properly seated.

6. Align the new module with the holes in the door and secure it in place with screws.

7. Reinstall the door panel by reversing the steps you took to remove it. Be sure to reconnect any electrical connectors, and test the power windows and folding mirrors to ensure that they are functioning properly.

8. Reconnect the negative battery cable.

That's it! You should now have successfully installed a driver front door module for 1 touch power windows and folding mirrors in your 2019-2020 Dodge Ram 1500 DT. If you have any questions or encounter any issues during the installation process, consult the manufacturer's instructions or seek the help of a professional mechanic.