2017-2018 Ford F-250 F-350 Grille Camera Washer Fluid Hose
The 2017-2018 Ford F-250 F-350 Grille Camera Washer Fluid Hose is a specific component designed for maintaining the functionality of the grille camera's cleaning system. This OEM part is essential for delivering washer fluid from the reservoir to the grille camera nozzle, ensuring clear visibility for the camera lens. The hose is manufactured for exact fitment on the 2017-2018 Ford F-250 and F-350 models and is tailored to meet the factory specifications for both length and diameter.
This is an OEM new genuine part, packaged and ready for installation, and it matches the quality and performance of the grille camera washer fluid hose available at a new car dealership. It is crafted to integrate seamlessly with the vehicle's original grille camera washer system.
- Torx screwdriver
- Trim removal tool
- Flathead screwdriver
1. Open the vehicle's hood and locate the grille camera washer fluid hose connection points.
2. Using the trim removal tool, carefully remove any fasteners or clips holding the old hose in place.
3. Disconnect the old hose from the washer fluid reservoir and grille camera nozzle by gently twisting and pulling it off.
4. Take the new grille camera washer fluid hose and connect one end to the washer fluid reservoir, ensuring a snug fit.
5. Route the hose towards the grille camera, securing it with the original fasteners or clips.
6. Attach the other end of the hose to the grille camera nozzle. Use a flathead screwdriver if needed to tighten the connection.
7. Check all connections for security and ensure the hose is not kinked or twisted.
8. Test the washer system to confirm the fluid is flowing properly through the new hose to the camera nozzle.
Duration: Approximately 20 minutes.
Skill Level: Beginner - This task requires basic mechanical knowledge and tool handling.
This Part Ships Out in 2-3 Days
If you are in need of this part for a time sensitive repair, please text us at 832-722-4697 for availability before you order.