Skip to product information
1 of 4

2016-2019 Ford Explorer Passenger Side 2nd Row Seat Wire Harness

2016-2019 Ford Explorer Passenger Side 2nd Row Seat Wire Harness

Regular price $ 56.63 USD
Regular price Sale price $ 56.63 USD
Sale Sold out
Brand New Genuine OEM Part.

This Genuine OEM auto part is a Passenger Side 2nd Row Seat Wire Harness for the 2016-2019 Ford Explorer. Identified by the part number "GB5Z14A699E", this harness is specifically designed for non-heated seats and only for models equipped with inflatable seat belts. Do not assume when it comes to the inflatable belts, you can cause a serious safety situation if you buy the wrong harness, if you don't know if you have inflatable belts, call your local Ford dealer with your Vin number to find out.

It serves as the main conduit for transmitting electrical signals to the seat's functionalities.

This is a brand new genuine part in OEM manufacturer's packaging. It is not an aftermarket part, but the same exact piece you would purchase from a new car dealership.

Installation Instructions

Tools Needed:

Wire crimping tool, Wire stripper, Electrical tape

Steps:

1. Start by parking the Ford Explorer on a level surface and ensure the ignition is turned off. Disconnect the vehicle's battery for safety.

2. Access the underside of the 2nd-row passenger seat. This might require moving the seat to its most forward position.

3. Locate the existing wire harness and disconnect it by unclipping any connectors.

4. Carefully remove any securing ties or clamps holding the harness in place.

5. Position the new Genuine OEM Wire Harness (GB5Z14A699E) in place, ensuring its alignment with the connectors and routing pathways.

6. Connect the harness to the appropriate connectors. Ensure each connection is secure and snug.

7. Use ties or clamps to secure the harness and prevent it from moving or getting pinched during seat adjustments.

8. Reconnect the vehicle's battery and test the seat's functionalities to ensure the harness is transmitting signals properly.

Duration: The installation typically takes about 1 to 1.5 hours.

Skill Level: Advanced

Vehicle Fitment

Year Range Make Model Specifications Part Description
2016-2019 Ford Explorer Non-heated seats with inflatable seat belts Passenger Side 2nd Row Seat Wire Harness
View full details