2016-2017 Accord 4 Door Front License Plate Holder - No Hardware
Installation Instructions:
-
Begin by locating the front license plate holder on your 2016-2017 Honda Accord 4-door model. It is located on the front bumper of the vehicle.
-
If the old bracket is still attached to the vehicle, use a flathead screwdriver to carefully pry it off the bumper.
-
Once the old bracket is removed, inspect the area to ensure it is clean and free of any debris or damage.
-
Take the new license plate holder bracket and carefully align it with the mounting holes on the front bumper. Press it into place, making sure it is securely attached.
-
If no hardware is included, you will need to source the necessary screws and bolts to secure the bracket to the front bumper. These can be obtained at a local hardware store or auto parts store.
-
Use the screws and bolts to secure the bracket to the front bumper. Tighten them until they are snug, but be careful not to over-tighten as this may cause damage to the bracket or bumper.
Skill Level Needed:
Replacing the front license plate holder bracket on a 2016-2017 Honda Accord 4-door model requires basic automotive knowledge and experience. If you are comfortable performing minor repairs and modifications on your vehicle, you should be able to complete this installation without difficulty.
Time to Complete:
The installation process should take approximately 15-30 minutes to complete, depending on your level of experience and the tools you have available. It is recommended that you take your time and follow the instructions carefully to ensure a proper and secure fit.
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.