2015-2018 Tahoe Yukon Escalade (1) GM ACDelco Front Shock For Non Magneride Only

Note there are several versions of this part. Call your local dealer and give them your VIN to be sure part Number  22891309 is right for you before you order. 

If you're driving a 2015-2018 Tahoe Yukon Escalade without the Magneride suspension system, you know that having a comfortable and stable ride is crucial. One of the most important components of your vehicle's suspension system is the front shocks, which help absorb the impact of bumps and uneven terrain. If you're experiencing rough handling or excessive bouncing while driving, it could be a sign that your front shocks need to be replaced. The GM ACDelco Front Shock for Non Magneride Only is the perfect solution to this problem, providing a smooth and stable ride that will make your driving experience more enjoyable.

Installation Instructions:

Replacing the Front Shock on a 2015-2018 Tahoe Yukon Escalade with a GM ACDelco Shock for Non Magneride Only is a straightforward process that can be completed with the right tools and knowledge. Here are the steps you need to follow to replace the existing shock with the new Genuine GM part:

Tools needed:

• Socket wrench
• Socket set
• Torque wrench

Skill Level:

• Intermediate

Time Needed:

• Approximately 1-2 hours

Step 1: Remove the Old Shock

• Lift the vehicle using a jack and secure it with jack stands.
• Remove the wheel where you will replace the shock.
• Using a socket wrench and socket set, remove the nut at the top of the old shock.
• Remove the two bolts at the bottom of the old shock using the socket set.

Step 2: Install the New Shock

• Install the new shock into the same location as the old shock.
• Replace the two bolts at the bottom of the new shock using the socket set.
• Replace the nut at the top of the new shock and tighten it to the manufacturer's specifications using a torque wrench.

Step 3: Test the New Shock

• Lower the vehicle back down to the ground and test the new shock by driving the vehicle.
• Test the shock by driving over bumps and rough terrain to ensure it is functioning correctly.

Step 4: Final Check

• Once you have installed the new shock and tested it, give it a final check to make sure it is secure and functioning correctly.

That's it! With these simple steps, you should be able to replace the old Front Shock on your 2015-2018 Tahoe Yukon Escalade with the new Genuine GM ACDelco Shock for Non Magneride Only. Remember to take your time and be patient during the process. If you encounter any problems or have any questions, consult a professional mechanic for assistance.