Click to zoom in
Note there are several versions of this part. Call your local GM dealer and give them your VIN to be sure the part number 13518044 is right for you before you order. (Also ask them about programming requirements).
Installation Instructions:
- Locate the restraint control module in the vehicle. It is typically located under the center console or under the driver's seat.
- Disconnect the negative battery cable to prevent accidental deployment of the airbags.
- Disconnect the wiring harness from the restraint control module by pressing the release tab and pulling the connector straight out.
- Remove the restraint control module by unfastening any mounting bolts or clips that may be securing it in place.
- Install the new restraint control module in the same location as the old one, and secure it with any mounting bolts or clips.
- Reconnect the wiring harness to the new restraint control module by pressing the connector straight in until it clicks into place.
- Reconnect the negative battery cable.
- Test the new restraint control module by turning on the ignition and making sure that the airbag warning light on the dashboard goes off after a few seconds.
Estimated time: 30 minutes to 1 hour, depending on the location of the restraint control module and any mounting hardware.
Skill level needed: Intermediate. This installation involves electrical wiring and handling of sensitive safety components. It is recommended that a qualified mechanic or technician perform the installation.
Tools needed:
- Socket wrench set
- Screwdriver set
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.