The 2013-2016 Ford Escape Heater Hose Tee for the 1.6L EcoBoost engine features a revised design aimed at improving durability and resistance to heat and pressure. This component is integral to the vehicle's heating system, providing a connection point for the heater hoses and ensuring proper coolant flow through the heater core.

This is a genuine OEM part, supplied in original manufacturer packaging, ensuring the highest level of compatibility and performance. It is specifically designed for 1.6L EcoBoost models, confirming to the precise engineering standards required for these vehicles.

Installation Instructions

Tools Needed:

• Hose clamp pliers
• Standard pliers
• Bucket to catch coolant

Instructions:

1. Allow the vehicle to cool completely before beginning installation.

2. Drain the coolant into a bucket by opening the drain valve on the bottom of the radiator.

3. Locate the existing heater hose tee in the engine compartment.

4. Use the hose clamp pliers to remove the clamps on the hoses connected to the old tee.

5. Carefully detach the hoses from the existing tee.

6. Install the new heater hose tee by connecting the hoses and securing them with the clamps.

7. Refill the cooling system with coolant and check for leaks.

8. Start the engine and allow it to reach operating temperature, checking for proper operation and absence of leaks.

Duration: This job takes approximately 1 hour to complete.

Skill Level: Intermediate

Vehicle Fitment