2011-2016 Kia Sportage Rear Power Window Control Switch Fits Either Side.

The 2011-2016 Kia Sportage Rear Power Window Control Switch is a genuine OEM auto part that is designed specifically for the 2011-2016 Kia Sportage. It is a direct replacement for the original switch and is compatible with either the driver's or passenger's side rear power window.

Skill level needed: Beginner

Tools needed:

• Phillips head screwdriver
• Trim removal tool (optional)

Installation instructions:

1. Start by lowering the rear windows all the way down.
2. Using a Phillips head screwdriver, remove the screw located at the bottom of the door panel.
3. Use the trim removal tool (optional) to remove the clips located around the edge of the door panel.
4. Lift the door panel off the door and disconnect the power window switch connector by pushing down on the tab and pulling it out.
5. Locate the rear power window control switch and release the tabs holding it in place.
6. Pull the switch out of the door panel and disconnect the wiring harness from the back of the switch.
7. Connect the wiring harness to the new switch and insert the switch into the door panel.
8. Snap the switch into place by pressing it down until it clicks.
9. Reconnect the power window switch connector and reattach the door panel to the door.
10. Secure the door panel by replacing the screw and snapping the clips back into place.

Estimated time: 30 minutes.