Click to zoom in
THE CAMERA IS NOT INCLUDED
The rear Tailgate Reverse Back-Up Camera Housing Bezel & Emblem is a direct fit for the following:
Note: Housing Bezel & Emblem Have Been Updated Since The Original Ones Were Produced. It will look very different from the original, but fits the same.
2010-2014 Ford F-150
-Includes Both Back-Up Camera Housing Bezel & Emblem.
The Camera and the screws are not included. For both of these, you can re-use your old ones as nothing has changed in the design of the hardware or camera.
Installation Instructions:
Installing a new Ford tailgate backup camera housing and emblem kit on a 2010-2014 Ford F-150 can be done with just a few basic tools. Here are the steps to follow:
Tools Needed:
- Socket wrench set
- Pliers
- Flat-head screwdriver
Skill Level:
- Moderate
Estimated Time:
- 1-2 hours
-
Begin by removing the old tailgate emblem and camera housing from the tailgate. Use a flat-head screwdriver to gently pry away the clips that hold the emblem and housing in place. Be careful not to damage the surrounding area or the parts themselves.
-
Once the old emblem and housing are removed, clean the surface of the tailgate where the new parts will be installed. Use a clean, dry cloth to remove any dirt or debris.
-
Take the new Ford tailgate back up camera housing and emblem kit and place the camera housing into the tailgate, making sure it is properly aligned. Use a socket wrench set to securely fasten the camera housing into place with the supplied screws.
-
Connect the camera's wiring harness to the appropriate connector on the vehicle. You may need to route the harness through the tailgate and into the cabin of the truck.
-
Take the new emblem and place it onto the tailgate, aligning it with the camera housing. Gently press the emblem into place, securing the clips onto the tailgate.
-
Once the new parts are securely attached, check them for proper fit and alignment. Make any necessary adjustments.
-
Finally, test the new camera to ensure it is working properly. You may need to activate the camera by shifting the truck into reverse.
Note: It is recommended to consult your vehicle's owner's manual for specific instructions and safety precautions before attempting this installation.
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.