The 2009-2012 Dodge Ram Back Seat Driver Side Inner or Outer Seat Belt Buckle is an auto part designed for the 2009-2012 Dodge Ram models. The seat belt buckle is located on the back seat of the vehicle, specifically on the driver side, it is used as a connection point for the seat belt, allowing the passenger to fasten and secure themselves while the vehicle is in motion.
The problem this product resolves is that the seat belt buckle can become damaged or worn over time due to general wear and tear caused by use. A damaged or worn seat belt buckle can make it difficult to properly fasten the seat belt, which can be a safety concern. Additionally, a damaged or worn seat belt buckle can also make the interior of the vehicle look unsightly.
To replace the back seat driver side inner or outer seat belt buckle on a 2009-2012 Dodge Ram, you can follow these steps:
-
Locate the seat belt buckle in your vehicle. The back seat driver side seat belt buckle is typically located on the left side of the vehicle, either on the inner or outer side of the seat.
-
Remove any plastic covers or trim that may be covering the seat belt buckle. You may need to use a flathead screwdriver or a trim removal tool to do this.
-
Disconnect the electrical connector for the seat belt buckle by pressing the release tab and pulling the connector apart.
-
Remove the bolts or screws that are holding the seat belt buckle in place using a wrench or socket set.
-
Gently pull the seat belt buckle away from the seat.
-
Take the new seat belt buckle and position it in place of the old seat belt buckle.
-
Reattach the bolts or screws that are holding the seat belt buckle in place using a wrench or socket set.
-
Reconnect the electrical connector for the seat belt buckle by pressing the connector together until it clicks into place.
-
Test the new seat belt buckle by buckling and unbuckling the seat belt to ensure it is securely attached and functioning properly.
-
Replace any plastic covers or trim that were removed earlier.
That's it! Your new back seat driver side inner or outer seat belt buckle for your 2009-2012 Dodge Ram should now be installed and providing a safe and secure way to fasten the seat belt in the back seat of your vehicle.
VEHICLE FITMENT
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
| 2012 | Ram | 1500 | Big Horn, Express, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman, Tradesman HD | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2012 | Ram | 2500 | Laramie, Laramie Longhorn, Outdoorsman, Power Wagon, SLT, ST | 5.7L V8 - Bi-Fuel, 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2012 | Ram | 3500 | Laramie, Laramie Longhorn, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2011 | Ram | 1500 | Big Horn, Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, Sport, Tradesman | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2011 | Ram | 2500 | Laramie, Laramie Longhorn, Power Wagon, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2011 | Ram | 3500 | Laramie, Laramie Longhorn, SLT, ST | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2010 | Dodge | Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
| 2010 | Dodge | Ram 2500 | Laramie, Power Wagon, SLT, ST, TRX | 5.7L V8 - Gas, 6.7L L6 - Diesel |
| 2010 | Dodge | Ram 3500 | Laramie, SLT, ST | 6.7L L6 - Diesel |
| 2009 | Dodge | Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6 - Gas, 4.7L V8 - Flex, 5.7L V8 - Gas |
Read More
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.