2007-2010 Silverado or Sierra 6.6 Duramax Diesel Oil Filler Tube

Looking for a reliable and high-quality solution to the common problem of a damaged or worn oil filler tube in your 2007-2010 Silverado or Sierra with 6.6 Duramax Diesel engine? Consider investing in the Oil Filler Tube Genuine New. This top-quality auto part is designed to provide a dependable and long-lasting solution to the common problem of worn or damaged oil filler tubes, helping to ensure the proper function and performance of your vehicle's engine.

Installation Instructions:

Replacing the oil filler tube on your 2007-2010 Silverado or Sierra with the Genuine New Tube (part number specific to your vehicle) is a straightforward job that can be done with basic tools and a low level of automotive repair skill.

Tools needed:

• 10mm socket wrench
• Pliers
• Clean rag

Step-by-step instructions:

1. Begin by locating the old or damaged oil filler tube on your vehicle. The tube is located on the engine and connects to the oil fill cap.
2. Use pliers to remove the hose clamp that connects the oil filler tube to the engine.
3. Gently pull the old oil filler tube out of the engine and set it aside.
4. Take the new Genuine GM Oil Filler Tube and insert it into the engine, making sure that it is properly aligned with the oil fill cap.
5. Use a 10mm socket wrench to tighten the bolt that secures the oil filler tube to the engine.
6. Reattach the hose clamp to the oil filler tube and tighten it with pliers.
7. Use a clean rag to wipe down the new oil filler tube and the surrounding area to ensure that there is no dirt or debris.
8. Check for any oil leaks or abnormal noises before starting the engine.

This installation should take less than 30 minutes to complete. If you have any questions or concerns, please refer to your vehicle's owner's manual or seek assistance from a qualified automotive technician.