Do you have one or more mysterious electrical gremlins haunting your 2007-2009 Acura MDX?
Many issues can be attributed to a bad Driver door wiring harness. Even things you would not think to associate with a door harness are controlled by this wiring.
Please note this does not fit the 2010-2013 Models.
Don't pay a mechanic a hundred dollars to replace this, you can do it yourself in just a few minutes!
Common Symptoms of a bad door harness.
1.- Door locks won't work
2.- DPMS won't work
3.- Rearview mirrors won't adjust or auto-tilt
4.- Power Tailgate won't open either by the FOB or Button in the door
5.- Gas cap won't open
6.- Alarm won't engage
7.- Windows won't work
8.- Sunroof won't work
Tools needed to replace:
1.- Small flat screwdriver
2.- Flat screwdriver
3.- New Genuine Acura harness.
Don't pay a mechanic a hundred dollars to replace this, you can do it yourself in just a few minutes!
1.- First of all you will need to remove the sub-harness from the door, This part comes as a whole with the grommet so you will have to pop the grommet off and remove the cable from the door.
2.- Now you will have to remove the fuse plastic cover completely (This just pops in) to get to the inside connections.
First, remove the door side molding (A) then remove the lower door guard (B) this just pops out with little force, Finally, remove the fuse box cover (C) by popping it off too! It will have a small plastic screw attached in the back you can just move aside the cover no need to remove it completely.
3. You only need to make enough room to see the sub-harness connections in the fuse box
The cable will have a small retainer plastic tab connected to the fuse box, You can break this as the new cable comes with it.
4. To install the cable just use the connectors as guides through the chassis hole, This is basically the hardest part because space is tight. What you can do is put your fingers between the fuse box and chassis and pull one connector to guide the whole cable.
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.
