Passenger Side
This is a new convertible top roof bow clamp latch for the 2005-2014 Ford Mustang. It is a Genuine OEM (Original Equipment Manufacturer) part, meaning it is manufactured by Ford specifically for these vehicle models.
The convertible top roof bow clamp latch is an important component of the vehicle's convertible top mechanism, as it secures the roof bows in place when the top is closed. Over time, the latch can become worn or damaged, causing the roof bows to come loose and potentially causing damage to the top or the mechanism.
Installation Instructions:
Installing a new genuine Ford convertible top roof bow clamp latch on a 2005-2014 Ford Mustang can be done with just a few basic tools. Here are the steps to follow:
Tools Needed:
- Socket wrench set
- Flat-head screwdriver
Skill Level:
- Easy to Moderate
Estimated Time:
- 30-60 minutes
-
Begin by locating the old convertible top roof bow clamp latch on the affected side of the vehicle. This latch is typically located near the front of the convertible top and may be covered in dirt or debris.
-
Use a socket wrench set to remove the bolts or screws that hold the old clamp latch in place. Be careful not to drop any of the hardware into the interior of the vehicle.
-
Once the old clamp latch is removed, clean the area where the new latch will be installed. Use a clean, dry cloth to remove any dirt or debris.
-
Take the new genuine Ford convertible top roof bow clamp latch and place it onto the appropriate location. Use the socket wrench set to securely fasten the latch into place with the supplied bolts or screws.
-
Test the new latch to ensure it is working properly. You may need to manually raise and lower the convertible top to test the latch's engagement.
-
Repeat steps 1-5 for the other side of the vehicle if necessary.
-
Finally, step back and admire your new genuine Ford convertible top roof bow clamp latch!
Note: It is recommended to consult your vehicle's owner's manual for specific instructions and safety precautions before attempting this installation.
THIS PART FITS
Make | Model | Year | Body & Trim | Engine & Transmission |
---|---|---|---|---|
Ford | Mustang | 2014 | Base, GT, Shelby GT500 | 3.7L V6 - Gas, 5.0L V8 - Gas, 5.8L V8 - Gas |
Ford | Mustang | 2013 | Base, GT, Shelby GT500 | 3.7L V6 - Gas, 5.0L V8 - Gas, 5.8L V8 - Gas |
Ford | Mustang | 2012 | Base, GT, Shelby GT500 | 3.7L V6 - Gas, 5.0L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2011 | Base, GT, Shelby GT500 | 3.7L V6 - Gas, 5.0L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2010 | Base, GT, Shelby GT500 | 4.0L V6 - Gas, 4.6L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2009 | Base, GT, Shelby GT500 | 4.0L V6 - Gas, 4.6L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2008 | Base, GT, Shelby GT, Shelby GT500 | 4.0L V6 - Gas, 4.6L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2007 | Base, GT, Shelby GT, Shelby GT500 | 4.0L V6 - Gas, 4.6L V8 - Gas, 5.4L V8 - Gas |
Ford | Mustang | 2006 | Base, GT | 4.0L V6 - Gas, 4.6L V8 - Gas |
EASY NO HASSLE RETURN INFORMATION
Simply return your part in the exact same condition and packaging that you received it in within 30 days for a full refund of the purchase price of the part, minus the original shipping charges. You don't even have to contact us. Just be sure the read the requirements below and follow the instructions at the bottom of this page.
WHAT CAN NOT BE RETURNED:
Any part that does not have all of the original packaging with the attached manufacturer part number label.
Believe it or not, this is super important! Don't throw away the packaging. Manufacturers won't accept returns on a part without the genuine OEM Packaging, so we won't be able to credit you. (Even if the part is brand new with no packaging, we would have to return it to you).
WE ALSO CANNOT ACCEPT YOUR RETURN IF:
You have installed or attempted to install or disassemble the part
You have painted the part.
You have broken the part.
You have lost the original packaging.
You have gotten the part wet, or the part has greasy fingerprints.
ELECTRICAL PARTS.
Electrical parts can only be returned if they have not been installed, programmed, or plugged in. If the part shows signs, of an attempted install we will be unable to accept your return.
An electrical part is any part that plugs in, contains a switch, sensor, circuit board, or electrical wiring.
All Products are. covered by a 1-year Warranty.
Our Warranty Coverage
We will replace the parts free of charge for any reason not caused by collision or installation, other human intervention, incorrect application, modifications, use of the products outside the context of its normal, customary, and intended operating conditions (including without limitation, any form of commercial, fleet, rental or off-road use), or physical damage for 1 year and only for the vehicle in which the part was originally installed.
One Time replacement.
Warranty Covers only one replacement in the warranty period. Multiple Replacements are not covered, after one replacement warranty will no longer be in effect.
Warranty Is nontransferable and is only valid for the VIN number of the vehicle for which it was purchased. Warranty does not transfer to the new owner of the item purchased or the vehicle purchased with the item installed.